How Do I Find The Model Number Of A Moen Faucet?

How do I find the model number of a moen faucet? – Typically, the model/series number consists of four or five digits beginning with “7” or “8” and may be followed by letters. Sometimes, the series number is located on the underside of the spout. Typically, the series number is located on the back of the decorative ring at the base of the spout.

How do I order Moen replacement parts?

Moen Incorporated may be reached by calling 1-800-289-6636 (Canada 1-800-465-6130) or by writing to 25300 Al Moen Drive, North OImsted, Ohio 44070-8036. All warranty claims require proof of purchase (original sales receipt) from the original consumer purchaser.

How do I locate the model number for my Moen shower faucet?

Typically, the model/series number consists of four or five digits beginning with “7” or “8” and may be followed by letters. Sometimes, the series number is located on the underside of the spout. Typically, the series number is located on the back of the decorative ring at the base of the spout.

Are Moen shower valves universally compatible?

Moen tub/shower valves have been manufactured with one of three valves for many years. There are Standard, Posi-Temp, and Moentrol valves present. Although the appearance is comparable, the trim is not always interchangeable. If your Moen valve operates in this manner, any Posi-Temp trim will fit.

Read More: How Much Does The Most Costly Cowboy Hat Cost?

How Do I Find the Model Number of a Moen Faucet? – Related Questions

How do I identify my bathroom faucet?

American Standard faucets can be identified by their 22-point broach. To confirm, measure the broach. If it measures 0.375 inches (0.95 cm), it is likely an older American Standard model, whereas if it measures 0.438 inches (1.11 cm), it is likely a newer American Standard model.

How do I determine the model of my Moen faucet?

Typically, the model/series number consists of four or five digits beginning with “7” or “8” and may be followed by letters. Sometimes, the series number is located on the underside of the spout. Typically, the series number is located on the back of the decorative ring at the base of the spout.

How can a cartridge be removed from a Moen faucet?

How do I obtain a free cartridge from Moen?

Are all shower valves the same?

Are Shower and Bathtub Valves Interchangeable? First, mixing manufacturers on trim and rough-in valves is strictly prohibited. Even within a single manufacturer, there are numerous valves with non-interchangeable trims. Shower sets are not always sold with trim and rough sold separately.

How can I determine the manufacturer and model of my kitchen faucet?

The model number is printed on a label that is attached to the faucet’s cold water supply line.

– The supply line is situated beneath the sink, countertop, bath rim, or bidet’s bowl.

– “P/N” is typically placed before the model number or part number.

How do I determine the type of faucet I have?

– Locate the logo. The quickest and easiest way to determine the manufacturer of your kitchen faucet is to locate its logo.

• Locate the model number.

– Count the broach’s splines and measure the stem.

– Distinctive characteristics.

Use a gauge for broaching.

Are all Moen cartridges for kitchen faucets identical?

Compatible with all Moen two-handle kitchen and bathroom faucets, as well as two- and three-handle tub/shower faucets manufactured before the introduction of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are incompatible with one another.

Where can I find the model number for my shower faucet?

The model number is printed on a tag attached to the faucet’s cold water supply line. The supply line is situated beneath the sink, countertop, bathtub rim, or bidet bowl. Typically, the model number or part number is preceded by “P/N.”

How do I determine if my shower valve is a Moen?

Typically, the model/series number consists of four or five digits beginning with “7” or “8” and may be followed by letters. Sometimes, the series number is located on the underside of the spout. Typically, the series number is located on the back of the decorative ring at the base of the spout.

How do I choose the size of a kitchen faucet?

– Step 1: Determine the Scope of Your Project.

Step 2: Evaluate the Sink and Mounting Holes.

Step 3: Measure the Centers of the Faucets.

Step 4: Examine the Surrounding Area.

Are all shower faucets the same?

They are all universal, and each and every Delta Shower Trim Kit is compatible with each and every one of these valves.

Are Moen cartridge replacements free?

During the Warranty Period, if this faucet develops a leak or drip, Moen will provide the necessary parts FREE OF CHARGE to restore the faucet to working order and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship.

Are all shower valves standardised?

Does Home Depot sell Moen components?

The Home Depot carries Moen – Faucet Parts – Plumbing Parts – Moen.

How can I determine the brand of my kitchen faucet?

– Locate the logo. The quickest and easiest way to determine the manufacturer of your kitchen faucet is to locate its logo.

• Locate the model number.

– Count the broach’s splines and measure the stem.

– Distinctive characteristics.

Use a gauge for broaching.